(This is another re-post of one of my Project Run & Play tutorials. See the entire "Howl at the Moon" look right here.)
Hi, it's Jessica from A Little Gray, and WOW- I'm so happy to be back here to share a tutorial this week! I feel especially proud that a boy look won this challenge. I am more comfortable sewing for my boy Hendrix any day- this girly stuff is still pretty new to me!
Details are really important in boy clothing. Things like pocket flaps and contrasting topstitching go a long way on a pair of pants, and simple additions like bright stripes kick up the wow factor. So that's what I'm going to show you today.
You'll need a main fabric, two or three different colors for the stripes, and a lining fabric. I'll show you how to make one pocket, but of course the amount of fabric required depends on how many pockets you add. My "Howl at the Moon" pants had 4 pockets in this size, 2 on the back and 2 on the sides by the knees.
First we'll make the striped patch pocket:
Cut each stripe to 1"x 5." Cut two pieces from your main fabric to 2.5"x 5." Cut one piece from the lining fabric to 6"x 5." Piece the striped front of the pocket together using a quarter inch seam allowance and press seams open.
Topstitch around the whole pocket 1/4" from the edge. Then pin in place onto the garment exactly where you want it. (I'm just using this scrap of yellow canvas for our example.)
Topstitch around the sides and bottom 1/8" from the edge, leaving the top open and reinforcing at the beginning and end.
Now we are ready to make the flap:
Use your pattern to cut out one from the main fabric and one from the lining fabric.
Pin right sides together and sew only around the curved edge with a half inch seam allowance. Leave the entire straight edge open. Trim seam allowance to 1/8," turn right side out through the top of the flap, and double topstitch the curve at 1/4" and 1/8."
Now pin the flap onto the garment right sides facing, so that the straight open edge is just slightly above the top of the patch pocket.
Sew it down 1/4" from the raw edge and then carefully trim the seam allowance down to 1/8."
Fold the flap down, press, and double topstitch at the top, and that raw edge will be enclosed underneath. If you'd like, you can add bar tacks at the top corners to keep the flaps from sticking up like I did on the original pants.
Your professional looking pocket is done and ready for action!